Wolver Motor Reanimator

Description
Packaging

208 L | 60 L | 20 L | 400 ML


WOLVER Motor Reanimator is a first aid matter in a shape of a motor oil additive for worn engines that restores engine normal performance and extends its mileage till repair.

Wolver Motor Reanimator - by enhancing thermal stability of oil and its elasticity  maintains tight oil film in piston clearance area, thus normalizing engine’s work.




Indications for use
   
It is recommended to be used when mileage is more than 100 000 km, when signs of wear occur or during prolonged extreme loads (rallies, mountains, desert, etc.)

Features

  • Compensates engine’s wear;
  • Extends mileage till repair;
  • Lifts up compression and power;
  • Reduces noise, smoke exhaust and oil consumption;
  • Enhances protective properties of oil;
  • Compatible with all engine types and engine oils;
  • Dissolves easily in any engine oil without sediment;
  • Does not contain harmful chemicals affecting engine parts.

Effects

Applicable in all gasoline, diesel and LPG engine types

Utilization

Warm up and muffle the engine. Pour the contents of the package into the oil filler neck. Allow the engine to run for 5 minutes. One package is enough for 3.5-5 liters of engine oil in the engine.
The temperature of the additive must not be lower than + 20 ° C. In the future, use when replacing engine oil or as it flows up to the level of the lower mark of the oil dipstick.

Data table

PROPERTIES UNIT TYPICAL INDICATORS
Kinematic viscosity at 100 °C mm²/s  239.1
TBN mgKOH/g 7.4
Flash point  °C  198
Density at 15.6 °C kg/m³  882

400ml - 4260360940583


Attention: Service instructions should be observed!
Wolver is a registered trademark of Wolver Lab GmbH
Cologne, Germany