208 L | 10 L | 5 L | 1.5 L
AntiFreeze & Coolant WG12 Ready to Use - is based on 1.2-ethanediole (mono-ethylene glycol), radiator protection and heat exchanger agent for operation both, summer and winter with permanent frost and rust protection (for all-season use).
AntiFreeze & Coolant WG12 Ready to Use - has been developed with high quality corrosion additives for motor and cooling system, and meets the current standard in the developement of engine-building.
AntiFreeze & Coolant WG12 Ready to Use - is free of nitrides, amines, phosphates and silicate.
Meets the requirements of:
ASTM D3306 / D4656 / D4985
AUDI, SEAT, SKODA G12, FORD WSS M97B44-D, GENERAL MOTORS, GM 6277 M, Opel (+B040 1065)
MAN 324 SNF
VW TL 774D
WOLVER Antifreeze & Coolant WG12 Ready to Use is excellently suitable for motors being made of cast iron, aluminium or of a combination of both the metals and at cooling systems being made of aluminium or copper alloyage.
WOLVER Antifreeze & Coolant WG12 Ready to Use is especially recommended for light run motors where a special aluminium protection at higher temperatures is required.
Commercial vehicles to 500.000 km (ca. 8.000 hours)
Passenger cars to 250.000 km (ca. 2.000 hours)
Stationary engines to 32.000 hours (or 5 years)
It is recommended, the coolant of radiators , to change all 5 years at the earliest, or if necessary with the achievement of the named stand-times.
WOLVER Antifreeze & Coolant WG12 Ready to Use can be mixed with the most of the coolants based on ethylene glycol.
To achieve an optimal corrosion protection and to avoid sludge formation it is recommended to use pure WOLVER Antifreeze & Coolant WG12 Ready to Use. For the preparation of mixtures softened water should be preferred.
|Relative density at 15.6 °C||kg/m³||1072|
|1,5L - Can||4414||4260360944147|
|5L - Can||4343||4260360943430|
|20L - Pail||4264||4260360942648|
|208L - Barrel||4265||4260360942655|