208L |60 L | 20L
Wolver Turbo Truck 10W-40 is a HC-Synthetic high performance motor oil for diesel engines of the newest generation. It was specially developed for diesel engines with EURO 5 and EURO 6 standard with after treatment of exhaust gas (particle separator). In order to maintain the functionality after treatment systems and to avoid disturbance, the use of a motor oil with Low SAPS (Low Ash) technology is obligatory.
Wolver Turbo Truck 10W-40 can also be used for diesel engines with Euro 4 and engines with particulate filters in combination with low-sulfur diesel (up to 50 ppm). The reduced values of sulphate, phosphor and sulphur are guaranteed by selection of especially developed basic oils and additives.
Wolver Turbo Truck 10W-40 has been developed for use in highly charged diesel motors of commercial vehicles in different operating conditions. Being a UHPD oil, it allows largest intervals of oil change (up to 100.000 km - depending on manufacturer recomendations) and can be used in all trucks, construction machines, busses, agricultural vehicles, etc.
Wolver Turbo Truck 10W-40 meets the requirements of European and North America vehicle manufacturers.
API CI-4 + UHPD
ACEA E6-, E7-, E9-08
Meets the requirements of
MAN M 3477, M 3271-1
MB (226.9), VOLVO VDS-3 , CNG CATERPILLAR ECF-1a
CUMMINS CES 20076/77
DAF Long drain
DEUTZ DQC-IV-10 LA
MACK EO-N / EO-M Plus
MTU Typ 3.1
RVI (Renault) RLD-2, RXD, RGD
SCANIA Low Ash
Wolver Turbo Truck 10W-40 is assigned to category 2 of used oils and thus is free for disposal.
Wolver Turbo Truck 10W-40 is miscible with comparable lubrications. It is recommended to take only Wolver Turbo Truck 10W-40 when refilling.
|Kinematic viscosity at 100 °C||mm²/s||15.3|
|Viscosity CCS at -25°C||mPa·s||6800|
|Density at 15.6 °C||kg/m³||872|
|20L - Pail||4187||4260360941870|
|208L - Barrel||4186||4260360941863|